Specs
Machine
Overall Widths: 2470 mm
Overall Lenght Base Machine: 4225mm
Overall Lenght with Grab Attachment: 5785mm
Overall Height: 3216 mm
Gross Vehicle Wt. : 4200 kg.
Max. Hradeability: 35%
Max. Trave; speed: 13 KMPH @ 2200 ERPM
Max. Gradeabiliy: 35%
Machine
Overall Widths: 2470 mm
Overall Lenght Base Machine: 4225mm
Overall Lenght with Grab Attachment: 5785mm
Overall Height: 3216 mm
Gross Vehicle Wt. : 4200 kg.
Max. Hradeability: 35%
Max. Trave; speed: 13 KMPH @ 2200 ERPM
Max. Gradeabiliy: 35%
Wheels & Tyres
Front Drive Wheels: 2 nos.16.9*28 – 12 PR
Tube tyre with Heavy duty steel rims
Rear Castor Wheel: 2 nos. 7.5*16- 8 PR Tube tyre with Heavy duty steel rims.
Hydraulic System
Hydraulic servo controlled, Variable Displacement Close look pump Motor sysem
Hydrostatic service brakes through close look system
Retune line fiter with 10 micron filter element.
Close look charge line with 10 microne pressure filter
Solenoid operated park brake release valve
Solenoid steel Hydrualic Tank with Ball valve and suction strainer
Hydraulic oil capcity – 100 Lts
Oild Level Gauge with Temp Indicator
Wheel Drive Unit
Planetary reduction wheel drive units with heavy Hydraulic motors
Full Torque, Fail Safe,Spring Applied Hydraulically Released (SAHR) Parking Brakes on both wheel drive units
Emergency tow feature opn wheel drives
Electrical System
12 V-100 AH maintenance free battery
35 Amp. Alternator
2.2 KW starter motor with engine
Key Machine Features
Full Hydrostatic Independent Drive Wheels
Extremely flexible Body Centered Turning
Hydraulic Servo Controlled pump for easy drive
Ergonomic Operator seat and controls with Arm rest
Easy Lever Controls for attachments operations
Full Visibility of attachment for entire range of operation
Wheel free wheeling feature on the front drives
Dual Rear tyre setup for improved reliavlity of castor axle.
High Grafeabiity for easy operation on rough ground.
Easy loading with curved boom on high sidewall trucks.
Low Fuel Consumption, Low Maintenance machine
Machine Specfication
Machine
- Overall Widths: 2470 mm
- Overall Lenght Base Machine: 4225mm
- Overall Lenght with Grab Attachment: 5785mm
- Overall Height: 3216 mm
- Gross Vehicle Wt. : 4200 kg.
- Max. Hradeability: 35%
- Max. Trave; speed: 13 KMPH @ 2200 ERPM
- Max. Gradeabiliy: 35%
Engine
- Simpson S433: 4 Cylinder, BS-III CEV,
- Direct Injection, Naturally Aspirated;
- Glycol cooled engine
- Max.Power: 49.5 HP @2200 RPM
- Max.Torque:220 NM @ 1100 RPM
- Fuel Tank with 60 lt. capacity.
Wheels & Tyres
- Front Drive Wheels: 2 nos.16.9*28 – 12 PR
- Tube tyre with Heavy duty steel rims
- Rear Castor Wheel: 2 nos. 7.5*16- 8 PR Tube tyre with Heavy duty steel rims.
Hydraulic System
- Hydraulic servo controlled, Variable Displacement Close look pump Motor sysem
- Hydrostatic service brakes through close look system
- Retune line fiter with 10 micron filter element.
- Close look charge line with 10 microne pressure filter
- Solenoid operated park brake release valve
- Solenoid steel Hydrualic Tank with Ball valve and suction strainer
- Hydraulic oil capcity – 100 Lts
- Oild Level Gauge with Temp Indicator
Wheel Drive Unit
- Planetary reduction wheel drive units with heavy Hydraulic motors
- Full Torque, Fail Safe,Spring Applied Hydraulically Released (SAHR) Parking Brakes on both wheel drive units
- Emergency tow feature opn wheel drives
Electrical System
- 12 V-100 AH maintenance free battery
- 35 Amp. Alternator
- 2.2 KW starter motor with engine
Key Machine Features
- Full Hydrostatic Independent Drive Wheels
- Extremely flexible Body Centered Turning
- Hydraulic Servo Controlled pump for easy drive
- Ergonomic Operator seat and controls with Arm rest
- Easy Lever Controls for attachments operations
- Full Visibility of attachment for entire range of operation
- Wheel free wheeling feature on the front drives
- Dual Rear tyre setup for improved reliavlity of castor axle.
- High Grafeabiity for easy operation on rough ground.
- Easy loading with curved boom on high sidewall trucks.
- Low Fuel Consumption, Low Maintenance machine
- Hydraulic oil cooler for Truble free Hydraulic operations
- Sealed Pin Joints for longer and reliable performance
- Multiple Application attachment optins for Vatied site Applications
- Multipurpose Grab attachment
- Clamhell Loaderbucket
- Timer re- handling – log Grapple
- Paddy Hay Bales- Reactangular Bale Grab
Grab Attachement
- Grab Area: 0.44 sq. meter
- Grab Width: 1400 mm
- Grab Opening : 1300 mm
- Std.Dump Height: 4700 mm(15′-5″)
- Outreach at max dump height: 1005 mm (3′-4′)
- Std. Pin Height: 5736 mm, Max.(18′-10′)
- Heavy Duty, Deep section: High Strength tynes
- Double thickness tynes for inherent strength & Integrity
Clamshell Loader Bucker Attachment
- Bucker volume: 0.61 cum.
- Bucker opening: 1300 mm
- Std. Dump Height: 4700 mm(15′-5′)
- outreach at Max Dump Height: 1005 mm (3′-4′)
- Std. Pin Height : 5736 mm max.(18′-10′)
- Easy Bolt on design for quick fitment.
Log Grapple Attachment
- Grapple Area: 0.28 sq. M
- Open width: 1305 mm
- Log Dia: Max. 450, Min.80 mm
- Std. Dump Height:1709 mm(5′-7′)
- Std. Pin Height: 5857 mm, Max.(19′-5′)
- Heavy Duty, High Strength tynes
- 360 degree continuous rotation for easy log alignment
Bale Grab Attachment(For Rectangular Bales)
- Bale Grab Size: 2*2m (~8 bales)
- No. of Tynes: 32 tynes
- Max Stacking Height: 5376 mm(17′-6′)
- Outreach at Max Dump Height:1709 mm (5′-7′)
- Std. Pin Height: 5857 mm max.(19′-3′)
- 100′ Rotator for criss-cross, Brik pattern layout of bales stacking.
